Multi-purpose computer stripper has obvious advantages
1. Multi-purpose high-speed computer wire stripper is cut by the high-speed wire material factory, peeled at two ends, peeled at one end and automatically cut and started at half stripping.
2. The servo motor is used to control the thread, and the peeling and other actions can cut the length more accurately.
3. Variable length, full stripping, and half stripping are set with key die, which is simple and convenient.
4. It is simple and convenient to peel off the long charge and convert the depth by fine adjustment.
5. The speed can be divided into five parts, which can be set according to the wire specification, so that the thick wire and thin wire can be stably produced.
6. Detect the functions such as low pressure, cylinder blocking, motor abnormality, counting and common display, and automatically shut down when abnormal, and check the display of human-machine interface, so as to facilitate rapid troubleshooting and reduce the downtime.
7. The best function of technical optimization is less, the pressure line is less, the adjustment time is short, and the operation is convenient.
8. It can be used together with the sub-line machine to finish the cable, cut the wire and peel off, and improve the output power.
9. Machined 600mm long wire can be pulled 50 times per minute, which is more than 4 times for one desktop machine and two peeling machines